Results 1 to 10 of 14

Thread: New member - Some Altec gear to share

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Hostboard Member slial's Avatar
    Join Date
    February 16th, 2013
    Location
    Rhode Island
    Posts
    24
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    New member - Some Altec gear to share

    I have slowly graduated to the world of efficient speakers via the acquisition of some vintage JBL and Altec speakers. I have had a 602b Duplex in a 606 enclosure for about 6 months, and ultimately planned to match it. In the process I came across a 606 second enclosure with no driver/crossover. Research and input from others put me on the path of seeking out a 604b, which I just acquired along with its N-1000-B crossover. I am really no closer to my goal of a pair of duplexes in proper matching enclosures, and now need to find the mate. The 604b came in a University enclosure, which while attractive, is clearly too low and too small to properly present the 604b. My immediate thought was to unload the 602b and start the process of finding the 604b mate. Problem is that the 604 and 602 sounded good enough together that I feel compelled to keep the 602 until I find the 604b mate, and even then to maybe keep the 602b and stuff it in the University enclosure and utilize it in a mono setup. Most folks more knowledgeable in Altec than me have pointed out the challenges of the 602b, but I wonder if it might shine in a slightly smaller enclosure under lower power, like a tube driven mono setup.

    Sort of ranting, introducing myself and looking for advice/opinions all at once! Thanks in advance...

    Scott

  2. #2
    Senior Hostboard Member juniper's Avatar
    Join Date
    September 8th, 2011
    Posts
    368
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: New member - Some Altec gear to share

    Welcome Slial!!! If I were you I would find another 604B and build cabinets that are optimal for those drivers. I have 604 g's they can really suprise you with the right recording. Good luck lots of good people and good info here...

  3. #3
    Junior Hostboard Member Bobabode's Avatar
    Join Date
    February 14th, 2013
    Location
    So California
    Posts
    13
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: New member - Some Altec gear to share

    Welcome, Scott.

  4. #4
    Senior Hostboard Member cradeldorf's Avatar
    Join Date
    October 16th, 2010
    Location
    Muskegon Mi.
    Posts
    1,334
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    4 Post(s)

    Re: New member - Some Altec gear to share

    Welcome Scott, Enjoy your new affliction.

  5. #5
    Senior Hostboard Member
    New member - Some Altec gear to share


    alancohen's Avatar
    Join Date
    October 26th, 2012
    Location
    Hunterdon Cty, NJ
    Posts
    684
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    4 Post(s)

    Re: New member - Some Altec gear to share

    Scott, Get out now, while you still have a chance. It's too late for the rest of us.

  6. #6
    Senior Hostboard Member
    New member - Some Altec gear to share


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,359
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    62 Post(s)

    Re: New member - Some Altec gear to share

    Or you could do two 604's and use the 602 as a center channel....
    Your neighbors called. They like your music.

  7. #7
    Junior Hostboard Member slial's Avatar
    Join Date
    February 16th, 2013
    Location
    Rhode Island
    Posts
    24
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Wink Re: New member - Some Altec gear to share

    Quote Originally Posted by alancohen View Post
    Scott, Get out now, while you still have a chance. It's too late for the rest of us.
    Unfortunately, I am long gone. This is just the latest audio addiction that includes Mcintosh gear, tubes and tube gear, clean VINYL and lots if it. I just seem to love it all

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 28100561 times.